MIT Devises ‘Electroadhesive Stamp’ to Build Ultra-Complex
If you’ve ever peeked inside a modern electronic gizmo, you know that circuit boards are getting deviously complex. You simply can’t rely on humans to assemble these devices anymore, but even robots are nearing their limits. Researchers at MIT have developed a new technology that could help robots manipulate the tiniest of tiny components, and they call it an electroadhesive stamp.
The electroadhesive stamp developed by MIT could allow a robot to pick up and set down a component as small as 20 nanometers. That’s about 1,000 times narrower than a human hair. The stamp uses a type of electroadhesion to grab hold of small objects with the aid of carbon nanotubes. You might remember those — they were everyone’s favorite advanced material until graphene came along. They’re still pretty useful here, though.
The nanotubes that make up the stamp are covered with a layer of aluminum oxide. Then applying voltage, the nanotubes become polarized. The positive charge at one end can induce the opposite polarization in nearby conductive materials. For example, a microscope electronic component. With the voltage on, the stamp picks up the component when they come in contact. When the team turns off the power, the stamp loses its stickiness, and the component drops off. The team likens this to scotch tape that you can turn on and off at will.
In laboratory testing, the electroadhesive stamp was able to pick up films of nanowires, micro-LEDs, and small clusters of metal or ceramic nanoparticles. These are all far too small for current robotic graspers to place on a circuit board. This is not the only potential fix for our robotic grasper issues, but it seems like a strong contender based on the early testing. This technology could eventually play a role in the construction of futuristic electronic devices with circuit diagrams that are impossible to manufacture right now.
Continue reading
Samsung, Stanford Built a 10,000 PPI Display That Could Revolutionize VR, AR
Ask anyone who has spent more than a few minutes inside a VR headset, and they'll mention the screen door effect. This could eliminate it for good.
How to Build a Face Mask Detector With a Jetson Nano 2GB and AlwaysAI
Nvidia continues to make AI at the edge more affordable and easier to deploy. So instead of simply running through the benchmarks to review the new Jetson Nano 2GB, I decided to tackle the DIY project of building my own face mask detector.
This Is a Bad Time to Build a High-End Gaming PC
We're not going to say it's the worst time to build a high-end gaming PC, but if you'll need to get lucky with some orders if you want to pull it off this year.
Apple Is Building Its Own 5G Modem
What was rumored is now official — Apple is building its own 5G modem.